- GeoIntentAppState - Enum in de.logiball.lnintents
-
Defines the available intent actions that were implemented by the LBNavigator
- getAzimuth() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the azimuth of the roadblock
- getColor() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the color filter to apply on the POI icon.
- getCoordinates() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the coordinate of the road block object
- getCurrentSpeed() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the current speed in km/h
- getDestinations() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the list of current destination locations as concatenated string
- getDistanceNext() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the remaining distance to the next destination
- getDistanceTotal() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the remaining distance to the last destination
- getEmergencyClass() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the emergency class
- getEndDate() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the end date
- getEndDate() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the date until which the roadblock is valid
- getEtaNext() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the unix time stamp of the estimated time of arrival to the next destination
- getEtaTotal() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the unix time stamp of the estimated time of arrival to the last destination
- getEventType() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the event type that caused the creation of this shared information package
- getHorizontalCenterPercent() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the horizontal percentage of the icon at which lies the center of the icon
- getIconData() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the icon data as bytes array
- getIconPath() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
- getId() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the pois id
- getId() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the id
- getId() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the id of the road block object
- getLastKnownWindDirection() - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcast
-
Get the last known wind direction in degrees (north = 0°, east = 90°,...)
- getLastKnownWindSpeed() - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcast
-
Get the last known wind speed
- getLastKnownWindSpeedUnit() - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcast
-
Get the last known wind speed unit
- getLatitude() - Method in class de.logiball.lnintents.Coordinate
-
Returns the coordinate's latitude
- getLatitude() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the decimal latitude of the current coordinate
- getLatitude() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the latitude of the poi
- getLatitude() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the latitude of the roadblock
- getLongitude() - Method in class de.logiball.lnintents.Coordinate
-
Returns the coordinate's longitude
- getLongitude() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the decimal longitude of the current coordinate
- getLongitude() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the longitude of the poi
- getLongitude() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the longitude of the roadblock
- getName() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the poi name
- getPackage() - Method in class de.logiball.lnintents.IntentBuilder
-
Returns the package id of the target intent receiver (navigator).
- getPosition() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the current position as decimal coordinate: concatenated floating points that are separated with a comma (WGS84 Decimal Coordinate).
- getRoadBlockPassageClass() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the minimum class to ignore this roadblock
- getSpeedLimit() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the current speed limit in km/h
- getStartDate() - Method in class de.logiball.lnintents.roadblock.RoadblockDescription
-
Returns the start date
- getStartDate() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the date from which the roadblock is valid
- getTimeStamp() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the time stamp when the intent was parsed
- getValue() - Method in enum de.logiball.lnintents.GeoIntentAppState
-
Get the app state value corresponding to this state
- getValue() - Method in enum de.logiball.lnintents.TourIntentAppState
-
Returns the corresponding app state value
- getVerticalCenterPercent() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the vertical percentage of the icon at which lies the center of the icon
- getWindInformationUpdateDate() - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcast
-
Get the last time the wind information was updated
- INSERT_TARGET_ADD_AS_NEXT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read whether the new target should be added as the next or the last target
- INSERT_TARGET_ANSWER_INTENT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read whether the intent that the navigator will use to tell the calling app whether the insertion was successful or not
- INSERT_TARGET_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the insert target intent
- INSERT_TARGET_NAME_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the target name
- INSERT_TARGET_NEW_TARGET_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the new target that shold be added to the current tour
- INSERT_TARGET_REQUIRES_USER_ACCEPTANCE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read whether the users acceptance is required to add the target
- INSERT_TARGET_RESULT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The result code that will be set if adding a new target to the current tour was a success
- InsertTargetIntentBuilder - Class in de.logiball.lnintents.tour
-
Builder for an intent that is will insert a new target into the current navigation of the localion navigator
- InsertTargetIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Constructor for the builder
- intent - Variable in class de.logiball.lnintents.IntentBuilder
-
The intent being worked on
- INTENT_HOST_LBN_DE - Static variable in class de.logiball.lnintents.IntentConstants
-
The shorten host of logiball url intents
- INTENT_HOST_LOGIBALL_DE - Static variable in class de.logiball.lnintents.IntentConstants
-
The default host of logiball url intents
- INTENT_PACKAGE_NAVIGATOR - Static variable in class de.logiball.lnintents.IntentConstants
-
The package to set if the localion navigator should be the only application to be allowed receiving this intent
- INTENT_PACKAGE_NAVIGATOR_STORE - Static variable in class de.logiball.lnintents.IntentConstants
-
The package to set if the store version of the localion navigator should be the only application to be allowed receiving this intent
- INTENT_SCHEME_GEO - Static variable in class de.logiball.lnintents.IntentConstants
-
The scheme that is used by intents that should show a specific coordinate on the map
- INTENT_SCHEME_GOOGLE_NAVIGATION - Static variable in class de.logiball.lnintents.IntentConstants
-
The scheme that is used by intents that should start a navigation to a specific destination
- INTENT_SCHEME_HTTP - Static variable in class de.logiball.lnintents.IntentConstants
-
The scheme that is used by intents that should show a specific url
- INTENT_SCHEME_HTTPS - Static variable in class de.logiball.lnintents.IntentConstants
-
The scheme that is used by intents that should show a specific url (with secure sockets layer)
- INTENT_URL_PREFIX - Static variable in class de.logiball.lnintents.IntentConstants
-
The separator between the protocol and the host
- IntentBuilder - Class in de.logiball.lnintents
-
Base class of all specific intent builders
Provides various helper functions to configure the intent and its data set
- IntentBuilder(Intent) - Constructor for class de.logiball.lnintents.IntentBuilder
-
A constructor for an intent builder that will adjust the given Intent
- IntentConstants - Class in de.logiball.lnintents
-
Collection of all intent constants
- IntentConstants() - Constructor for class de.logiball.lnintents.IntentConstants
-
- isIngoing() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the flag that indicates if all edges leading in the polygon should be closed
- isNavigating() - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Returns the flag that indicates if a navigation process is currently active
- isOutgoing() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Returns the flag that indicates if all edges leading out of the polygon should be closed
- isShowNameOnMap() - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Returns the flag that indicates if the name should be painted as a label on the map
- LB_ACTION_GEO_BROADCAST - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to request shared information to third party applications
- LB_BROADCAST_DESTINATION_REACHED_FINAL - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a destination was reached
- LB_BROADCAST_DESTINATION_REACHED_NEXT - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a destination was reached
- LB_BROADCAST_ETA_UPDATED - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a destination was reached
- LB_BROADCAST_NAVIGATION_ENDED - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a navigation process ended
- LB_BROADCAST_NAVIGATION_STARTED - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a navigation process was started
- LB_BROADCAST_REROUTING - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a destination was reached
- LB_BROADCAST_SINGLE_REQUEST - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the event that caused the broadcast creation after a single request
- LB_GEO_APP_STATE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the app state from the intent data
- LB_GEO_DESTINATION_ACTION_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the destination action from the intent data
- LB_GEO_DESTINATION_INTENT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the destination intent from the intent data
- LB_GEO_DIALOG_DELAY_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the dialog delay value from the intent data
- LB_GEO_INCLUDE_CURRENT_POSITION_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read and set the flag, that indicates if current position should be included for optimization, from and to the intent data.
- LB_GEO_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the lb geo intent
- LB_GEO_LOCATION_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the location information from the intent data
- LB_GEO_NAVIGATION_DELAY_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the navigation delay value from the intent data
- LB_GEO_OPTIMIZATION_MESSAGE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the result message from and to the response intent for a tour optimization intent
- LB_GEO_OPTIMIZATION_RECEIVER_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the package id of the application that should receive the optimization result
- LB_GEO_OPTIMIZATION_SUCCESS_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read and write the success flag from and to the response intent for a tour optimization intent
- LB_GEO_OPTIMIZE_LAST_STATION_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the flag, that indicates if last station should be optimized as well, from and to the intent data
- LB_GEO_OPTIONAL_NAME_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the optional location name from the intent data
- LB_GEO_OPTIONAL_TEXT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the message information from the intent data
- LB_GEO_OPTIONAL_ZOOM_LEVEL_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the zoom level from the intent data
- LB_GEO_SPECIAL_RIGHTS_ROUTING_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the flag that controls the responsibility dialog creation from the intent data
- LB_ITERATIVE_ADDRESS_SEARCH_PICKER - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the lb geo intent
- LB_KEY_CURRENT_POSITION - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the current decimal coordinate as concatenated floating points that are separated with a comma (WGS84 Decimal Coordinate).
- LB_KEY_CURRENT_POSITION_LAT - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the decimal latitude of the current coordinate
- LB_KEY_CURRENT_POSITION_LON - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the decimal longitude of the current coordinate
- LB_KEY_CURRENT_SPEED - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the current speed in km/h
- LB_KEY_DESTINATION - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the list of current destination locations.
- LB_KEY_ETA_NEXT - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the estimated time of arrival to the next destination.
- LB_KEY_ETA_TOTAL - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the estimated time of arrival to the last destination.
- LB_KEY_EVENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the event type that caused the creation of this shared information package
- LB_KEY_INTENT_RECEIVER_CLASS - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the class name of the receiver of the result intent which contains the shared information [string]
- LB_KEY_INTENT_RECEIVER_PACKAGE - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the package name of the receiver of the result intent which contains the shared information [string]
- LB_KEY_IS_NAVIGATING - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the flag that indicates if a navigation process is currently active
- LB_KEY_REMAINING_DISTANCE_NEXT - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the remaining distance to the next destination.
- LB_KEY_REMAINING_DISTANCE_TOTAL - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the remaining distance to the last destination.
- LB_KEY_SPEED_LIMIT - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is used to store and load the speed limit in km/h
- LB_LOGIN_PASSWORD - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the extra that stores the password to use for login
- LB_LOGIN_USERNAME - Static variable in class de.logiball.lnintents.IntentConstants
-
The identifier of the extra that stores the username to use for login
- LB_REVERSE_GEOCODING_ADDRESS_PICKER - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the lb reverse geo coding address picker
- LB_REVERSE_GEOCODING_LATITUDE - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the latitude as WGS84 Decimal Coordinate.
- LB_REVERSE_GEOCODING_LONGITUDE - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the longitude as WGS84 Decimal Coordinate.
- LB_REVERSE_GEOCODING_MAX_RESULTS - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the max search result count.
- LB_REVERSE_GEOCODING_RADIUS - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the search radius in meters.
- LB_STOP_NAVIGATION_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the stop navigation intent
- LB_TYPE_GEO_EXTENDED - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to show geographical information via the navigator
- LB_TYPE_JENKINS_TEST - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to start unit tests via jenkins
- LB_TYPE_OPTIMIZATION_RESPONSE - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to send the optimized order of a tour to third party applications
- LB_TYPE_POI - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to process and visualize custom POIs via the navigator
- LB_TYPE_SINGLE_REQUEST - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to request shared information to third party applications
- LB_TYPE_SINGLE_RESPONSE - Static variable in class de.logiball.lnintents.IntentConstants
-
The intent type that is used to send, receive and identify the intent which is used to send shared information to third party applications
- LN_CLOSE_APP_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the close app intent
- LN_DELETE_ALL_POIS - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key that specifies if all pois should be deleted
- LN_DELETE_POIS_IDS - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key that specifies which pois should be deleted
- LN_DELETE_POIS_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the delete pois intent
- LN_MAP_DOWNLOAD_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the map download intent
- LN_ROTATE_MAP_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the rotate map intent
- LN_ROTATE_MAP_ROTATION - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key that specifies the map rotation to use
- LN_ROTATE_MAP_ROTATION_3D - Static variable in class de.logiball.lnintents.IntentConstants
-
The 3d rotations name
- LN_ROTATE_MAP_ROTATION_NORTH - Static variable in class de.logiball.lnintents.IntentConstants
-
The North rotations name
- LN_ROTATE_MAP_ROTATION_VEHICLE - Static variable in class de.logiball.lnintents.IntentConstants
-
The vehicle direction rotations name
- LN_SETTINGS_THEME_MODE - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key that specifies the theme mode (day, night, auto, etc.) to use
- LN_UPDATE_THEME_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the update theme mode intent
- LN_WIND_INFORMATION_DIRECTION - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key for the wind direction information
- LN_WIND_INFORMATION_INTENT_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent for the wind information
- LN_WIND_INFORMATION_REQUEST_BROADCAST_TYPE - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the broadcast intent that should trigger another app to send new wind information to the navigator
- LN_WIND_INFORMATION_SPEED - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key for the wind speed information
- LN_WIND_INFORMATION_SPEED_UNIT - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key for the wind speeds unit information
- LN_WIND_INFORMATION_UPDATE_TIME - Static variable in class de.logiball.lnintents.IntentConstants
-
The extra key for the information when the wind information was last updated
- LNGeoBroadcast - Class in de.logiball.lnintents.lngeo
-
Information holder for geo information that were received from a broadcast intent
- LNGeoBroadcast(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNGeoBroadcast
-
Processes the geo information intent of the LBNavigator
- LNGeoBroadcastReceiver - Class in de.logiball.lnintents.lngeo
-
Must be implemented to receive geo broadcasts
- LNGeoBroadcastReceiver() - Constructor for class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiver
-
Constructor that defines the default intent filter
- LNGeoBroadcastReceiver(IntentFilter) - Constructor for class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiver
-
Constructor that sets the given intent filter and applies the default filter properties
- LNGeoBroadcastReceiverBuilder - Class in de.logiball.lnintents.lngeo
-
A builder to help observing LBGeoBroadcast intents send by the navigator
- LNGeoBroadcastReceiverBuilder() - Constructor for class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiverBuilder
-
- LNGeoIntentBuilder - Class in de.logiball.lnintents.lngeo
-
Provides helper functions to configure the localion intent that is used to pass location information to the LBNavigator
- LNGeoIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Construct the builder
- LNGeoRequestIntentBuilder - Class in de.logiball.lnintents.lngeo
-
A builder for an intent that request current geo information from the localion navigator
- LNGeoRequestIntentBuilder() - Constructor for class de.logiball.lnintents.lngeo.LNGeoRequestIntentBuilder
-
Constructor that creates a new base intent
- LNGeoRequestIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNGeoRequestIntentBuilder
-
Constructor that binds the given base intent
- LNGeoResponseBuilder - Class in de.logiball.lnintents.lngeo
-
A builder for the geo response intent
- LNGeoResponseBuilder() - Constructor for class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Constructor that creates a new base intent
- LNGeoResponseBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Constructor that binds the given base intent
- LNIterativeSearchIntentBuilder - Class in de.logiball.lnintents.lngeo
-
Provides helper functions to configure the localion navigator intent that allows the user to pick an address in an iterative fashion.
- LNIterativeSearchIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNIterativeSearchIntentBuilder
-
A constructor for an intent builder that will adjust the given Intent
- LNReverseGeocodingIntentBuilder - Class in de.logiball.lnintents.lngeo
-
Provides helper functions to configure the logiball intent that is used to pick a result of a reverse geocoding
- LNReverseGeocodingIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
A constructor for an intent builder that will adjust the given Intent
- LNTourIntentBuilder - Class in de.logiball.lnintents.lngeo
-
Helper class to simplify intent construction.
- LNTourIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Default Constructor
- LNUrlIntentBuilder - Class in de.logiball.lnintents.lnurl
-
Provides helper functions to configure the localion navigator intent that is used to pass location information encoded as an url to the navigator
- LNUrlIntentBuilder() - Constructor for class de.logiball.lnintents.lnurl.LNUrlIntentBuilder
-
Constructor that constructs the base intent
- LNUrlIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.lnurl.LNUrlIntentBuilder
-
Constructor that sets the base intent
- requireConfirmation() - Method in class de.logiball.lnintents.roadblock.DeleteRoadblockIntentBuilder
-
Sets the flag that indicates if the user should be asked to confirm the intent execution.
- requireConfirmation() - Method in class de.logiball.lnintents.roadblock.DisableRoadblockIntentBuilder
-
Sets the flag that indicates if the user should be asked to confirm the intent execution.
- requireConfirmation() - Method in class de.logiball.lnintents.roadblock.EnableRoadblockIntentBuilder
-
Sets the flag that indicates if the user should be asked to confirm the intent execution.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.information.wind.WindInformationIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.poi.DeletePoisIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.roadblock.DeleteRoadblockIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.roadblock.DisableRoadblockIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.roadblock.EnableRoadblockIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.roadblock.RoadblockIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.routing.StopNavigationIntentBuilder
-
Optional.
- resetNavigatorVisibility(boolean) - Method in class de.logiball.lnintents.system.UpdateThemeIntentBuilder
-
Optional.
- RESPONSIBILITY_HINT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The key that is required to read the flag that controls the responsibility dialog creation from the intent data
- ROADBLOCK_ADD_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra that describes all the roadblocks that should be created
- ROADBLOCK_ADD_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent that can be used to add new road blocks or update existing roadblocks
- ROADBLOCK_ALL_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra flag that indicates if all roadblocks should be deleted, enabled or disabled (instead of only a specific sub set)
- ROADBLOCK_CONFIRMATION_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra flag that indicates if the user should be asked to confirm the intent execution.
- ROADBLOCK_DELETE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra that contains all ids of the roadblocks that should be deleted
- ROADBLOCK_DELETE_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent that can be used to delete existing roadblocks
- ROADBLOCK_DISABLE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra that contains all ids of the roadblocks that should be disabled
- ROADBLOCK_DISABLE_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent that can be used to disable one or more roadblocks
- ROADBLOCK_ENABLE_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra that contains all ids of the roadblocks that should be enabled
- ROADBLOCK_ENABLE_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent that can be used to enable one or more disabled roadblocks
- ROADBLOCK_POLYGON_ADD_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
The name of the extra that describes all the roadblock polygonss that should be created
- ROADBLOCK_POLYGON_ADD_INTENT - Static variable in class de.logiball.lnintents.IntentConstants
-
The type of the intent that can be used to add new road blocks or update existing roadblocks
- RoadblockDescription - Class in de.logiball.lnintents.roadblock
-
An object that describes a roadblock
- RoadblockDescription(long, double, double, double, int, Date, Date) - Constructor for class de.logiball.lnintents.roadblock.RoadblockDescription
-
Constructor for a description
- RoadblockIntentBuilder - Class in de.logiball.lnintents.roadblock
-
A builder for an intent that will create or update road blocks in the localion navigator
- RoadblockIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.roadblock.RoadblockIntentBuilder
-
Constructor for the intent builder which changes the given intent
- RoadblockPolygonDescription - Class in de.logiball.lnintents.roadblock
-
- RoadblockPolygonDescription(long, List<Coordinate>, boolean, boolean, int, Date, Date) - Constructor for class de.logiball.lnintents.roadblock.RoadblockPolygonDescription
-
Default constructor
- RoadblockPolygonIntentBuilder - Class in de.logiball.lnintents.roadblock
-
Helper class to build roadblock intents that can block great areas
- RoadblockPolygonIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.roadblock.RoadblockPolygonIntentBuilder
-
Constructor for the intent builder which changes the given intent
- RotateMapIntentBuilder - Class in de.logiball.lnintents.map
-
- RotateMapIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.map.RotateMapIntentBuilder
-
A constructor for an intent builder that will adjust the given Intent
- SECURITY_HINT_EXTRA - Static variable in class de.logiball.lnintents.IntentConstants
-
Deprecated.
- SEPARATOR - Static variable in class de.logiball.lnintents.IntentConstants
-
The separator that separates elements of a list in a String
- setActivity(Activity) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiverStarter
-
Sets the given activity that will be registered to the os service to allow this application receiving geo broadcasts of the LBNavigator
- setActivity(Activity) - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiverBuilder
-
Sets the given activity that will be registered to the os service to allow this application receiving geo broadcasts of the LBNavigator
- setAddAsNextTarget(boolean) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set whether the target should be added as the next or the last target.
- setAnswerIntent(PendingIntent) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set an intent that will be used by the Navigator to tell the sender of the build intent whether the addition was successful.
- setAppStateValue(GeoIntentAppState) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set the state that the app will be brought to.
- setAppStateValue(TourIntentAppState) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set the state that the app will be brought to.
- setAppUrl(String) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Set the url that will be used by the Navigator to send an intent to the calling app
- setBringToFront() - Method in class de.logiball.lnintents.roadblock.DeleteRoadblockIntentBuilder
-
Set the flag that the app should be brought to the front
- setBringToFront() - Method in class de.logiball.lnintents.roadblock.DisableRoadblockIntentBuilder
-
Set the flag that the app should be brought to the front
- setBringToFront() - Method in class de.logiball.lnintents.roadblock.EnableRoadblockIntentBuilder
-
Set the flag that the app should be brought to the front
- setBringToFront() - Method in class de.logiball.lnintents.roadblock.RoadblockIntentBuilder
-
Set the flag that the app should be brought to the front
- setBringToFront() - Method in class de.logiball.lnintents.roadblock.RoadblockPolygonIntentBuilder
-
Set the flag that the app should be brought to the front
- setBroadcastReceiver(WindInformationRequestBroadcastReceiver) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiverStarter
-
Sets the observer that will receive the
broadcasts
- setBroadcastReceiver(LNGeoBroadcastReceiver) - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiverBuilder
-
Sets the observer that will receive the
broadcasts
- setButtonText(String) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Set the text that should be displayed on the button that lets the user return to the sending application
- setColor(float, float, float, float) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the color filter to apply on the POI icon
- setContext(Context) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiverStarter
-
Sets the given context that will be registered to the os service to allow this application receiving geo broadcasts of the LBNavigator
- setContext(Context) - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiverBuilder
-
Sets the given context that will be registered to the os service to allow this application receiving geo broadcasts of the LBNavigator
- setCurrentPosition(String) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets current position as decimal coordinate: concatenated floating points that are separated with a comma (WGS84 Decimal Coordinate).
- setCurrentSpeed(Integer) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the current speed in km/h
- setDescription(String) - Method in class de.logiball.lnintents.lnurl.LNUrlIntentBuilder
-
Sets the location's description that will be shown in the lb navigator
- setDestinationActionValue(int) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Optionally set the action to perform when the final destination was reached.
- setDestinationIntent(PendingIntent) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set the pending intent to execute when the final destination was reached.
- setDestinations(String) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the list of current destination locations as concatenated string
- setDialogDelayValue(int) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Sets the delay until the dialog with the given text is hidden, in ms.
- setDialogDelayValue(int) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Sets the delay until the dialog with the given text is hidden, in ms.
- setDirection(int) - Method in class de.logiball.lnintents.information.wind.WindInformationIntentBuilder
-
Set the wind direction information for the wind
- setDistanceNext(Double) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the remaining distance to the next destination
- setDistanceTotal(Double) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the remaining distance to the last destination
- setEtaNext(Long) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the unix time stamp of the estimated time of arrival to the next destination
- setEtaTotal(Long) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the unix time stamp of the estimated time of arrival to the last destination
- setEventType(String) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the event type that caused the creation of this shared information package.
- setHideDialog(boolean) - Method in class de.logiball.lnintents.routing.StopNavigationIntentBuilder
-
Optional.
- setHorizontalCenterPercent(float) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the horizontal percentage of the icon at which lies the center of the icon
- setIconData(byte[]) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the icon data as bytes array
- setIconPath(String) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
- setIconUri(Uri, Activity) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the uri of the poi icon file
- setIconUri(Uri, ContentResolver) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the uri of the poi icon file
- setId(long) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Set the pois id (useful to set if the intent sender does not specify the pois id)
- setIncludeCurrentPosition(boolean) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set if the current position should be included for the optimization calculation
- setIntentTarget(Boolean) - Method in class de.logiball.lnintents.IntentBuilder
-
Set whether the target that the intent should have.
- setLastKnownWindDirection(int) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastBuilder
-
Set the last known wind direction
- setLastKnownWindSpeed(double) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastBuilder
-
Set the last known wind speed
- setLastKnownWindSpeedUnit(String) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastBuilder
-
Set the last known wind speeds unit
- setLastUpdateDate(Date) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastBuilder
-
Set the last time at which the wind information was updated
- setLatitude(Double) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the decimal latitude of the current coordinate
- setLatitude(double) - Method in class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
Set the latitude as WGS 84 decimal coordinate to search for
- setLocation(String) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set the location that will be shown.
- setLocation(double, double) - Method in class de.logiball.lnintents.lnurl.LNUrlIntentBuilder
-
Sets the location's coordinate that will be shown
- setLoginCredentials(String, String) - Method in class de.logiball.lnintents.IntentBuilder
-
Set the login credentials that should be used to login a user
- setLongitude(Double) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the decimal longitude of the current coordinate
- setLongitude(double) - Method in class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
Set the longitude as WGS 84 decimal coordinate to search for
- setMapRotation(String) - Method in class de.logiball.lnintents.map.RotateMapIntentBuilder
-
The map rotation to set for the map
- setMaxResults(int) - Method in class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
Set the maximal search result count
- setName(String) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set the name that will be displayed in destination, routing and navigation view.
- setName(String) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Sets the tour station names that will be displayed in destination, routing and navigation view.
- setName(String) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the poi name
- setName(String) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Sets the custom name of the target location to insert
- setNavigating(Boolean) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the flag that indicates if a navigation process is currently active
- setNavigationDelayValue(int) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Sets the delay, until the navigation is started, in ms.
- setOptimizationReceiver(String) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set if an optimized tour should be returned to a specific app.
- setOptimizeLastStation(boolean) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set if the last station should be optimized as well
- setPoisToDelete(long[]) - Method in class de.logiball.lnintents.poi.DeletePoisIntentBuilder
-
Set the pois that should be deleted
- setRadius(int) - Method in class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
Set the maximal distance to the search coordinate in meters
- setRequiresUsersAcceptance(boolean) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set whether the user should be asked if they want to add the target to their tour.
- setResponseClass(String) - Method in class de.logiball.lnintents.lngeo.LNGeoRequestIntentBuilder
-
Sets the class name of the class that will receive the requested geo information
- setResponsePackage(String) - Method in class de.logiball.lnintents.lngeo.LNGeoRequestIntentBuilder
-
Sets the package name of the class that will receive the requested geo information
- setResponsibilityDialog(boolean) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set if the responsibility screen should be displayed, IF the user did not mark the dialog to never be shown again.
- setResponsibilityDialog(boolean) - Method in class de.logiball.lnintents.lngeo.LNIterativeSearchIntentBuilder
-
Set if the responsibility screen should be displayed, If the user did not mark the dialog to never be shown again.
- setResponsibilityDialog(boolean) - Method in class de.logiball.lnintents.lngeo.LNReverseGeocodingIntentBuilder
-
Set if the responsibility dialog should be displayed, If the user did not mark the dialog to never be shown again.
- setResponsibilityDialog(boolean) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set whether the responsibility dialog should be displayed, IF the user did not mark the dialog to never be shown again.
- setRotation(String) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Optionally set the map rotation to apply.
- setRoutingWithSpecialRights(boolean) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set if the route should be calculated with special rights active.
- setRoutingWithSpecialRights(boolean) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set if the route should be calculated with special rights active.
- setShowPoisOnMap(boolean) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Set the flag, whether the map should be centered above the new pois or not
- setSpeed(double) - Method in class de.logiball.lnintents.information.wind.WindInformationIntentBuilder
-
Set the wind speed information for the wind
- setSpeedLimit(Integer) - Method in class de.logiball.lnintents.lngeo.LNGeoResponseBuilder
-
Sets the current speed limit in km/h
- setSpeedUnit(String) - Method in class de.logiball.lnintents.information.wind.WindInformationIntentBuilder
-
Set the wind speeds unit information for the wind
- setTarget(String) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set the target that should be inserted.
- setTarget(double, double) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set the target to be inserted.
- setTarget(String, String) - Method in class de.logiball.lnintents.tour.InsertTargetIntentBuilder
-
Set the target to be inserted.
- setText(String) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Set the text that will be displayed in a dialog
- setText(String) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set the text that will be displayed in a dialog
- setThemeMode(UpdateThemeIntentBuilder.ThemeUpdateMode) - Method in class de.logiball.lnintents.system.UpdateThemeIntentBuilder
-
Defines the the theme mode to apply
- setTitle(String) - Method in class de.logiball.lnintents.lnurl.LNUrlIntentBuilder
-
Sets the location's title that will be shown in the lb navigator
- setTourPath(String) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
- setTourStations(String) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set the list of concatenated tour stations.
- setTourUri(Uri) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set the uri of a tour file.
- setTourUriAndGrantPermission(Uri, Activity) - Method in class de.logiball.lnintents.lngeo.LNTourIntentBuilder
-
Set the uri of a tour file and grants the navigator the permission to read this file
- setVerticalCenterPercent(float) - Method in class de.logiball.lnintents.poi.DynamicPoiDefinition
-
Sets the vertical percentage of the icon at which lies the center of the icon
- setZoomLevel(int) - Method in class de.logiball.lnintents.lngeo.LNGeoIntentBuilder
-
Optionally set the zoom level from 0 (whole world) to 21 (most detailed street level).
- setZoomLevel(int) - Method in class de.logiball.lnintents.poi.PoiIntentBuilder
-
Optionally set the zoom level from 0 (whole world) to 21 (most detailed street level).
- startObserving(Context) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiver
-
Registers a broadcast receiver for the given activity
- startObserving() - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiverStarter
-
Registers a broadcast receiver for the given activity
- startObserving(Context) - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiver
-
Registers a broadcast receiver for the given activity
- StopNavigationIntentBuilder - Class in de.logiball.lnintents.routing
-
Builder for an intent to stop a current navigation in the localion navigator
- StopNavigationIntentBuilder(Intent) - Constructor for class de.logiball.lnintents.routing.StopNavigationIntentBuilder
-
Construct the intent builder which adjusts the given intent
- stopObserving(Activity) - Method in class de.logiball.lnintents.information.wind.WindInformationRequestBroadcastReceiver
-
Unregisters the given activity from receiving geo broadcasts
- stopObserving(Activity) - Method in class de.logiball.lnintents.lngeo.LNGeoBroadcastReceiver
-
Unregisters the given activity from receiving geo broadcasts